The RCM3400 modulefacilitates the integration of analog and Ethernet functions into a user system.
Rabbit is a brand of Digi International
Key features :
Microprocessor Rabbit3000@ 29.4MHz, 512Ko Flash, 512Ko SRAM, 8 analog inputs, 47 digital E/S, alternate E/S bus, 5 series ports,MAC ID installed (RJ45 Ethernet not installed but ready to be wired)
| Characteristics |
RCM3400 |
|
Microprocessor
|
Rabbit3000 - 29.4 MHz
|
|
EMI discount
|
Spectrum spread (radiant emissions)
|
|
Flash Memory
|
512Ko
|
|
SRAM Memory
|
512Ko
|
|
Backup battery
|
Battery/user battery connection (RTC and SRAM support)
|
|
Analog entries
|
8 common mass lanes (11 bits) or 4 differential lanes (12 bits).
Programmable gain 1, 2, 4, 5, 8, 10, 16 and 20V/V
V/ref, Conversion
|
|
General-purpose entries/exits
|
47 Digital E/S:
- 41 configurable E/S
- 3 fixed entries
- 3 fixed outputs
|
|
Additional entries
|
2 start modes, Reset input
|
|
Extra outings
|
Status, Reset exit
|
|
Bus Entry/Exit Auxiliary
|
8 lines of data and 6 address lines (shared with I/S), E/S reading/writing
|
|
Series Ports
|
5 CMOS compatible:
- 4 asynchronous configurables (with IrDA)
- 1 port asynchronous series reserved programming
- Support for MIR / SIR IrDA
|
|
Series speed
|
Maximum speed in asynchronous - CLK/8 (bps)
|
|
Slave port
|
Slave port for use in master or smart device based Rabbit or other master controller
|
|
Real-time clock
|
Yes
|
| Timers |
10 8-bit timers (6 cascadables from the first) and 1 10-bit timer with 2 registers Game
|
|
Watchdog / Supervisor
|
Yes
|
|
Pwm
|
10-bit free counter and 4 pulse width registers
|
|
Entry capture
|
2 entry-capture channels usable for time or frequency measurement
|
|
Squaring decoders
|
2 squaring chains for inputs modules external incremental coders
|
|
Power
|
3.0 - 3.45VDC - 29.4MHz / 97mA
2.8 - 3.45 VDC@ 14.7MHz / 57mA
|
|
Temperature of use
|
-40C to 85C
|
|
Humidity
|
5-95% unsted
|
|
Connectors
|
2 male connectors 2 x 17 pines at 1.27mm step
|
| Size |
35 x 29 x 7.4 mm
|
