It's the size of a stamp, Connectcore 6ul based on NXP i.mx6ul processor Provide a secure, low-cost connection platform.
Its CMS digi smtplus dimensions allow you to access simplified CMS technology, which is well known to designers and integrators. An alternative to LGA is available, which provides design flexibility and access to all commonly used interfaces.
The module takes NXP i.mx6ul application processor as the model, which is a reference for connecting security devices in today's intelligent communication field.
It seamlessly integrates Dual Ethernet and pre certified dual band Wi Fi (802.11a/b/g/n/ac) connections as well as Bluetooth 4.2 connections.
The security of embedded devices is a key design aspect. In a context, the number of connected applications ("iots") is interrelated. Therefore, connectcore for i.mx6ul can eliminate the implementation obstacles by providing "digi trustfence" software, which is a fully integrated module security platform and fully supports Linux.
|1. Characteristics of mx6ul (cc6ul) connector
|processor||NXP i.mx6ul-2, arm? Cortex? - A7 @ 528 MHz, 128 KB L2 cache, with neon MPE (media processor engine) coprocessor and DMA (SDMA) intelligent programmable controller|
|memory||Up to 2 GB NAND flash (SLC), up to 1 GB DDR3|
|PMIC company||NXP PF3000|
|Video / graphics||2D pixel (PXP) processing pipeline for color space conversion, sampling, alpha mixing and rotation, 8 - / 16 - / 18 - / 24 bit parallel LCD display, resolution up to WXGA (1366x768), support 8 / 10 / 16 / 24 bit parallel CSI of BT.656|
|Security||Ais-31 coprocessor conforming to TRNG, ECC / aes256 / TDES / RSA for encryption / decryption, SHA-1 / 224 / 256, famexe PKI coprocessor supporting 4096 bit RSA of ECC / ECDSA, / 544 bit, secure RTC, secure JTAG, secure storage, secure key management, spa / DPA / DFA (power / timing / fault attack protection), anti-corruption monitoring Digi trustfence embedded security framework|
|Peripherals / interfaces||1 x dedicated MMC 4.5/sd 3.0/sdio port (1 - / 2-4 bits), 2 x USB 2.0 OTG with PHY, 3x I2S / Sai, 1 x s / PDIF TX / Rx, 2 x flexcan (2.0B), 4 x I2C, 4 x SPI, 7 x UART, 4 x timer, 8 x PWM, 3 x watchdog, 2 x 12 bit ADC (10 channels), 4-wire or 5-wire touch controller, up to 103 GPIO|
||16 bit address / up to 16 bit data (multi and non multi mode)|
|Ethernet||Dual Ethernet 10 / 100 Mbit MAC + IEEE 1588|
|wireless||802.11a/b/g/n/ac 1x1 (MCS 0-9), antenna, Bluetooth 4.2, with "strong" WPA2 authentication - enterprise / encryption for Wi Fi connection|
|MCA microcontroller assistant
||Arm cortex? - M0 + ultra low power consumption, up to 48 MHz (NXP kinetics kl03: kl03p24m48sf0)|
||-40 ° C to + 85 ° C|
||-50 ° C to + 125 ° C|
||5% to 90% (non condensing)|
||USA, Canada, EU, Japan, Australia / New Zealand|
|Emissions / immunization / safety||FCC Part 15 class B, en 55022 class B, en 61000-3-2, en 61000-3-3, ICES-003 class B, VCCI class II, as 3548, FCC Part 15 sub part C section 15.247, IC (Industry Canada), rss-210 5th Edition section 6.2.2 (o), en 300 328, en 301 489-17, en 55024, EN 301 489-3, safety UL / ur (or equivalent)|
||Temperature: IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-78; vibration / shock: IEC 60068-2-6, IEC 60068-2-64, IEC 60068-2-27, stop|
|Installation / fixing
||Digi smtplus standard package CMS installation, using 76-pad package to slot edge (spacing 1.27 mm) or LGA 245-pad option (spacing 1.27 mm)|
|size||29 mm x 29 mm x 3.5 mm|
|consumption||Sleep mode (active Linux, no network): 100mA @ 5V
Sleep mode (Linux activity, Wi Fi transmission 25%): 118ma @ 5V
Standby mode (with memory refresh): 6mA @ 5V
|Ultra low power mode
||Trigger event mode: 25 μ a @ 3V (i.mx6ul off, MCA LLS with active HS comparator)
Programming wake up mode: 25 μ a @ 3V (i.mx6ul off, MCA LLS with active HS comparator)
|Refer to connectcore 6ul series
|CC-MX-JN58-Z1||Connectcore for i.mx6ul-2582mhz, industrial temperature, NAND SLC 256 MB, DDR3 256 MB, dual 10 / 100 Ethernet (no WiFi, no Bluetooth)|
|CC-WMX-JN58-NE||Connectcore for i.mx6ul-2582mhz, industrial temperature, NAND SLC 256 MB, DDR3 256 MB, dual 10 / 100 Ethernet, WiFi 802.11a/b/g/n/ac, Bluetooth 4.2, antenna|
|CC-MX-JN7A-Z1||Connectcore for i.mx6ul-2, 528 MHz, industrial temperature, NAND SLC 1 GB，DDR3 1 GB, dual 10 / 100 Ethernet (no WiFi, no Bluetooth)|
|CC-WMX-JN7A-NE||Connectcore for i.mx6ul-2, 528 MHz, industrial temperature, NAND SLC 1 GB，DDR3 1 GB, dual 10 / 100 Ethernet, WiFi 802.11a/b/g/n/ac, Bluetooth 4.2, antenna|
|Cc-wmx6ul-start||Connectcore 6ul entry development kit with built in SBC Express|
|Cc-wmx6ul-kit||Connectcore 6ul development kit with integrated SBC Pro|