Description
Digi Connect ME Modulesare the first embedded serial to Ethernet gateways. Based on the NetSilicon NS7520 @ 55MHz processor, these modules allow the simple integration of Ethernet connectivity from serial signals.
They integrate SSL / SSH security protocols, and are IPV6 compatible
They come with plug-and-play firmware or complete development tools for easy integration of an Ethernet network connection with easy web accessibility.
The standard Digi Connect ME Module: DC-ME-01T-S is the module most often used to make a TCP / IP connection from UART signals
New generation with 4MB of Flash 8MB of RAM, unique login / password management: DC-ME4-01T-S and DC-ME4-01T-C
The Digi ConnectME DC-ME-01T-S is still available from Matlog
Characteristics |
Digi Connect ME Ethernet model |
Processor |
32bits NET + ARM RISC (NS7520 @ 55MHz) |
Flash memory |
2 or 4 MB |
SRAM memory |
8 MB |
Serial interface |
TTL serial interface, bit rate up to 230 Kbps, support for TXD-RXD-RTS-CTS-DTR-DSR-DCD signals, hardware and software flow control |
General purpose I / O |
Up to 10 I / O shared with an external IRQ |
Network interface |
- Standard: IEEE 802.3 - Physical layer: 10 / 100Base-T - 10/100 Mbps speed (automatic detection) - Mode: full or half duplex (automatic detection) - Connector: RJ-45 |
Leds |
2: connection and network activity |
Connector |
Samtec (FTS-110-01-F-DV-TR) 2x10 pins with a pitch of 1.27 mm |
Food |
3.3 VDC @ 250 mA (825mW) On-board power control |
Operating temperature |
- 40 ° C to + 85 ° C |
Humidity |
5% to 95% non-condensing |
Dimensions |
36.7mm x 19.05mm x 21.69mm |
Approvals |
FCC part 15 class B, EN55022 class B, EN61000-3-2 and EN61000-3-3, ICES-003 class B, VCCI class II, AS 3548, FCC part 15 subpart C section 15.247, IC (Canada) RSS -210 part 5 section 6.2.2, EN 300 328, EN 301 489-3, UL 60950-1, EN 60950 (European Union), CSA C22.2 n ° 60950, EN 55024, etc ... |
DESIGNATION |
Ref. to order |
Digi Connect ME module (standard version) Digi Connect ME, standard firmware, 2MB Flash, 8MB RAM |
DC-ME-01T-S |
Module Digi Connect ME (customizable version) Digi Connect ME customizable firmware 2MB Flash, 8MB RAM |
DC-ME-01T-C |
Digi Connect ME module (customizable PoE version) DC ME, customizable firmware, PoE 802.3af, 2MB Flash, 8MB RAM |
DC-ME-01T-PC |
Kit Digi Connect ME integration for standard module Digi Connect ME module, development board, power supply, cables and electronic diagrams and Plug and Play configuration software |
DC-ME-01T-KIT |