Description
Seco Development Platform Q7 Starter Kit 2.0
This platform requires the addition of the selected module for development
Multiplateform starter kit compatible with Qseven® X86 and Arm Rev. 2.0: A complete package that includes the basic components necessary to start development.
The new Cross Platform Starter Kit 2.0 is based on the CE7-A42 carrier card, born from the SGET consortium specifications. The kit is a complete kit which includes all the elements necessary to start development with the QSEven® CPU modules, both on X86 and ARM architectures, and above all, to explore the possibilities offered by these two different worlds. This is due to the possibility of going from one architecture to another at any time, with just a few small software changes and a minimum of effort and time.
| Video Interfaces | LVDS Dual Channel 24-bit + Backlight Connectors Or 2 x EDP Connectors Multimode Display Port Or HDMI Connector |
| Mass storage | 1 x Sata Connector with HDD Power Connector 1 x Msata Slot MicroSD Slot on Combo MicroSD + SIM Connector |
| Networking | Up to 2 x Gigabit Ethernet Connectors |
| USB | 1x USB 3.0 HOST PORT ON TYPE-A SOCKET 1x USB 2.0 Host Ports On Double Type-A Sockets 2 x USB 2.0 Host Ports On Internal Pin Header 1 x USB 2.0 OTG Port on Micro-Ab socket (USB Port Shared with Minipcl-E Slot) |
| PCI-E | Minipcl-e Slot Full / Half size, combined with Sim Card Slot |
| Audio | Audio Interface on Internal Pin Header |
| Serial Ports | 4-WIRES RS-232 / RS-422 / RS-485 Configurable Serial Port on DB9 Male Connector 2 x RS-232 Full-Modem Serial Ports on Internal Header (Need LPC Interface from Qseven® module) Can interface on pcb terminal block |
| Other nterfaces | Internal spin spin Header LPC Bus Internal Pin Header SM BUS / 12C GPIO Expander, Makes Available 16 x GPIOS On Internal Pin Header Front Panel Header 1 x 28 Pin Connector for Additional Features (12C, ACPI Signals, SM Bus, Watch Dog, Thermal Management) +12V Tachometric Fan Connector Optional Debug USB Port on Minib Socket Optional MFG Connector for J Tag Programming of Qseven® Module |
| Power Supply | +12VDC STANDARD MINI-FIT ATX Power Connector Coin Cell Battery Holder for Cmos and RTC |
| Operating Temperature* | -40 ° C ÷ +85 ° C (Industrial Temperature Range) |
| Dimensions | 146 x 102 mm (5.75 "x 4.02") |
