Description
The Rabbit MINICORE of the RCM 6700 family allow very simple development of a data logger or a device requiring an on-board Webserver.
The module offers up to 6 serial ports, configurable digital I / O, and power consumption management.
The module is fully programmable and contains a copyright-free TCP / IP stack
- main Features :
- Rabbit 6000 microprocessor,
- 10/100 Ethernet
- 1 MB of RAM, Up to 4MB of Flash
Characteristics | RCM6700 | RCM6710 | RCM6750 | RCM6760 |
Microprocessor | Rabbit 6000 @ 200 MHz | |||
Ethernet port | N / A | 10/100, RJ-45, 2 LEDs | N / A | 10/100, RJ-45, 2 LEDs |
Flash memory | 1MB | 4MB | ||
SRAM memory | 1 MB | |||
Battery Memory Backup | 32K Internal | 32K internal, 1MB external | ||
FIM (interface module) | 400MHz DRPIC 165X 1K program / 192B DataRam | |||
Entries exits | Up to 32 parallel digital inputs / outputs | |||
Serial Ports | 6 High Speed, 4 of which are serial clock (SPI) | |||
Series speed | Maximum asynchronous speed = CLK / 8 (bps) | |||
Real time clock | YES | |||
Additional outputs | Status, Reset | |||
Timers | 10 8-bit timers (6 cascadable on the first) and a 10-bit timer with 2 match registers | |||
Watchdog / Supervisor | Yes | |||
PWM | 4 independent PWM outputs | |||
I²C | 1 channel, standard 100Kbits / s & 400KBit / s clock mode | |||
Quadrature decoder | 2 quadrature strings accept inputs from external incremental encoder modules | |||
(2 direct inputs and quadrature) | ||||
Power supply with Ethernet | 210 mA @ 3.3V | 250 mA @ 3.3V | 250 mA @ 3.3V | 260 mA @ 3.3V |
Power supply without Ethernet | 150 mA @ 3.3 V | 130 mA @ 3.3V | 130 mA @ 3.3V | 140 mA@3.3V |
Operating temperature | - 40 ° C to + 85 ° C | |||
Humidity | 5% to 95% non-condensing | |||
Connections | 52 Pins Mini PCI Express | |||
Dimensions | 30 x 51 x 3 mm |