Description
The RCM3209 module Is ideal for designers who want to develop and implement embedded embedded systems 10 /100BaseT Ethernet connectivity.
Rabbit is a trademark of Digi International
Primary Characteristics :
Microprocessor Rabbit3000 @ 44,2MHz, Ultra-Low EMI, Flash 512KB, SRAM 512KB + 256KB, 52 digital I/O, 6 serial ports
Characteristics |
RCM3209 |
|
Microprocessor |
Rabbit3000 @ 44.2MHz |
|
EMI Reduction |
EFully spectrum to reduce electromagnetic interference |
|
Ethernet port |
10 /100BaseT, RJ-45, autodetect, 3 LEDs |
|
Flash Memory |
512KB |
|
SRAM program memory |
512KB |
|
Data SRAM |
256KB |
|
Backup Battery |
User battery connection (RTC and SRAM support) |
|
General purpose inputs/Outputs |
52 Digital I/O: -44 configurable I/O -4 fixed entries -4 fixed outputs |
|
Additional Entries |
2 Startup modes, Reset |
|
Additional Outputs |
Status, Reset |
|
Auxiliary bus inputs/outputs |
8 lines of data and 6 address lines (shared with I/O), |
|
Serial ports |
6 CMOS-compatible: -6 configurable asynchronously (with IrDA), 4 in series clock (SPI) and 2 in SDLC/HDLC (with IrDA) -1 asynchronous clock serial port for programming -Receiver-transceiver support for MIR/SIR IrDA |
|
Serial Speed |
Maximum asynchronous speed = CLK/8 (bps) |
|
Slave interface |
A slave port is used to use other RCM (or Rabbit) modules in master mode or smart devices |
|
Real Time Clock |
Yes |
|
Timers |
10 8-bit timers (6 cascadables on the first) and 1 timer of 10 bits with 2 matches registers |
|
Watchdog / Supervisor |
Yes |
|
PWR |
10-bit counter and 4 modulation registers |
|
Inspect Inputs |
2 impulse inputs for speed measurement or event detection |
|
Decoder Quadrature |
2 quadrature strings for coder module entries |
|
Feeding |
3.15-3.45 VDC, 325mA @ 3.3V |
|
Usage Temperature |
-40 °C to + 85 °C |
|
Humidity |
5-95 % without condensation |
|
Connections |
2 x 17 pins (not 2mm) |
|
Dimensions |
69 x 47 x 22 mm |