Description
RCM4000 and RCM4100 modules are complete miniature computers integrating the microprocessor Rabbit4000 @ 59 MHz. Rabbit is a trademark of Digi International
main Features : 32MB Nand Flash, 512KB Flash / 512KB SRAM, 8 analog I / O, 40 general purpose I / O, 6 serial ports, Ultra low EMI ...
Characteristics |
RCM4000 |
RCM4010 |
RCM4110 |
RCM4120 |
Microprocessor |
Rabbit4000 at 59 MHz |
Rabbit4000 at 29.5 MHz |
Rabbit4000 at 59 MHz |
|
EMI reduction |
Spread spectrum to reduce electromagnetic interference |
|||
Ethernet |
Integrated Ethernet 10BaseT, RJ-45, 2 LEDs |
No |
||
Flash memory |
512 KB + 32MB Nand |
512 KB |
512 KB |
|
SRAM memory |
512 KB |
256 KB |
512KB + 512KB data |
|
Entries exits configurable digital |
19 with 4 levels of alternating functions |
25 with 4 levels of alternating functions |
40 with 4 levels of alternating functions |
|
Analog inputs |
8 common ground channels (11bits) or 4 diff. (12bits) |
No |
No |
|
Additional entries |
2 startup mode, Reset, CONVERT |
2 startup mode, Reset |
2 startup mode, Reset |
|
Additional outputs |
Status, Reset, I / OR / W, analog VRef |
Status, Reset, I / OR / W |
Status, Reset, I / OR / W |
|
Auxiliary bus inputs / outputs |
8 data lines and 6 address lines (shared with I / O), plus read / write control lines |
|||
Synchronous PWM channels |
No |
2 with 10-bit cpt, 2 with phase var. or synchr. with 16bits cpt |
4 with 10-bit counter, 4 variable or synchronous phase with 16-bit counter |
|
Serial ports |
5 CMOS compatible |
6 CMOS compatible |
||
- All configurable in asynchronous mode (with IrDA), 4 in serial clock (SPI) - 2 configurable in SDLC / HDLC (RCM4100 / 4110, only 1 on RCM4000 / 4010) - 1 asynchronous serial port for programming - 1 serial clock port for the A / D converter (RCM4000 and RCM4100) - Transceiver support for MIR / SIR IrDA (RCM4100 / 4110) |
||||
Series speed |
Maximum asynchronous speed = CLK / 8 (bps) |
|||
Backup battery |
Connection for user battery (RTC and SRAM support) |
|||
Slave interface |
A slave port allows other RCM modules (or on a Rabbit base) to be used in master mode or as smart devices |
|||
Real time clock |
Yes |
|||
Timers |
10 8-bit timers (6 cascadable on the first) and a 10-bit timer with 2 match registers A 16-bit timer equipped with 4 outputs and 8 set / reset registers |
|||
Watchdog / Supervisor |
Yes |
|||
Impulse inputs |
No |
2 capture input channels usable for speed measurement or event detection |
||
Quadrature decoders |
No |
2 quadrature chains accepting inputs from incremental encoder modules ext. |
||
Food |
3 - 3.6 VDC 185 mA @ 3.3 V |
3 - 3.6 VDC 65 mA @ 3.3 V |
3 - 3.6 VDC 125 mA @ 3.3 V |
|
Operating temperature |
0 ° C to + 70 ° C |
0 ° C to + 70 ° C |
-40 ° C to + 85 ° C |
|
Humidity |
5% to 95% non-condensing |
|||
Connectors |
2 male connectors of 2 x 25 pins (pitch of 1.27 mm) 1 male programming connector of 2 x 5 pins (1.27 mm pitch) |
|||
Dimensions |
61 mm x 47 mm x 20 mm |
48 mm x 36 mm x 12 mm |
The RCM4000 or RCM4010 development kit includes:
- An RCM4000, RCM4010 calculator
- A welcome card / prototyping
- Dynamic C development software
- A manual
- Complete documentation on CDRom and on paper including electronic diagrams
- A programming cable for development and debugging
- An assortment of connectors and accessories