Description
VisionCB-8M-STD-Carrier/Development Card for the Visionsom-8mmini family, NXP SOC IMX8MMINI NXP SOC modules (Arm Quad Corex-A53 + single Cortex-M4). The carrier card, associated with a module system (SOM), constitutes a complete development platform similar to a SBC. The carrier card hosts the most common interfaces such as USB, Ethernet, PCIe, etc. A wide variety of interfaces allows it to be used both as a complete development platform or as an autonomous final product.
The module connects to the carrier card via the Sodimm connector.
The VisionCB-8M-STD carrier card is equipped with a SEGGER J-Link debugger and a Linux series console port on USB VCOM.
| Model | VisionCB-8M-STD |
| Interface | Sodimm200 |
| Som | Visionsom Family of Based On Nxp Quad Cortex-A53 and single Cortex-M4 Cores (IMX8MMIni) |
| Programming/Debug connectors | Built-in Segger J-Link Jtag Debugger |
| Extension connectors: | |
| Raspberry Pi Compatible Connectors | 2x20 Pin Header (Male) |
| Arduino Universal Connector | Female Headers |
| SD Card | Dedicated MicroSD Connector |
| Communication: | |
| PCIe (Single Lane) | 16-PIN FFC/FPC Connector |
| Ethernet | 1X 10/100/1000MBIT/S, RJ45 |
| USB Host | 1x type A Connectors |
| USB-OTG | 1xMicrousb Connector |
| Console | 1x Microousb Connector |
| Display and camera: | |
| Mipi-DSI Interface | 30-PIN FFC/FPC Connector |
| MIPI-CSI Interface | 30-PIN FFC/FPC Connector |
| User interface | 4 User Pushbuttons/2 System Pushbuttons/4 User LEDs/2 System LEDS |
| Feed | |
| DC Connector | Input Voltage 9-12V DC |
| Temperature range | 0 to +70 ° C |
| Dimensions | 160mm x 100mm x 18mm |
