Description
VisionCB-R-STD-Support/Development Card for the Visionsom-RT family, Core Modules NXP I.MX RT (ARM Cortex-M7). A carrier card, associated with a module system (SOM), constitutes a complete development platform. The carrier card acuille the most common interfaces such as USB, Ethernet, etc. A wide variety of interfaces allows it to be used both as a complete development platform or as an autonomous final product.
The module connects to the carrier card via the Sodimm connector.
| Som Interface | |
| Interface | Sodimm200 |
| Model | Visionsom-RT based on the NXP I.MX RT (Arm Cortex-M7) microcontroller) |
| Programming/Debug connectors | |
| Jtag | 20 Pin Connector 0.10 "(We Suggest to Use Segger J-Link) |
| Trace | 19 Pin Connector 0.05 "(We Suggest to Use Segger J-Trace) |
| Extension connectors | |
| Arduino Uno Rev. 3 | 1x8, 1x6, 1x8, 1x10 Pin Headers (Female) |
| Raspberry Pi Compatible Connectors | 2x20 Pin Header (Male) |
| Communication | |
| Ethernet | 1X 10/100MBIT/S, RJ45 |
| USB Host | 2x type A Connectors |
| Console | 1x microousb b connector (via ftdi ft230 uart to usb converter) |
| Display | |
| Interface | 50-PIn FFC/FPC Parallel RGB-24-bit, (1366 x 768 max. Resolution) |
| User interface | |
| 5 pushbuttons | |
| 5 LEDs | |
| DC supply | Input Voltage 9-12V DC |
| Food via microousb | Input Voltage 5V DC |
| Temperature range | 0 to +70 ° C |
| Dimensions | 130mm x 90mm x 17mm |
