VisionCB-STM32MP1-STD -Carrier/Development card for the Visionsom-STM32MP1 family (STM32MP157), STMICROELECTRONICS SOC STM32MP1 (ARM DUAL CORTEX-A7 + single Cortex-M4). The carrier card associated with a module system (SOM) is a complete development platform similar to a SBC. The carrier card houses the most common interfaces such as USB, Ethernet, etc. A wide variety of interfaces allows it to be used both as a complete development platform or as an autonomous final product.
The module connects to the carrier card via the Sodimm connector.
VisionCB-STM32MP1-STD is equipped with a debugger St-Link / V2-1 SWD and a Linux series console port on USB VCOM.
| Model |
VisionCB-STM32MP1-STD |
| Som Interface |
Sodimm200 |
|
Visionsom-STM32 based on the Stmicroelectronics Dual Cortex-A7 and Single Cortex-M4 Core STM32MP1 application processor Core STM32MP1 |
| Programming/Debug connectors |
Built-in St-Link/V2-1 Swd Debugger |
| Extension connectors: |
|
| Raspberry Pi Compatible Connectors |
2x20 Pin Header (Male, 33 GPIOS) |
| SD Card |
Dedicated MicroSD Connector |
| Communication: |
|
| Ethernet |
10/100MBIT/S, RJ45 |
| USB Host |
Type A Connectors |
| USB-OTG |
Microousb Connector |
| Console |
Microousb Connector |
| Display: |
|
| Parallel Interface |
50-PIN FFC/FPC Parallel RGB-24-bit |
| Mipi-DSI Interface |
30-PIN FFC/FPC Connector |
| User interface |
3 pushbuttons / 5 LEDs |
| Feed |
|
| DC Connector |
Input Voltage 9-12V DC |
| RTC Battery |
Socket for CR1220 |
| Temperature range |
0 to +70 ° C |
| Dimensions |
160mm x 100mm x 17mm |
