XBee Series 6 WiFi


The modules XBee Wi-Fi 802.11 b/g/n are complete modems that allow Wi-Fi connectivity to be implemented very quickly from a serial port or a UART or SPI signal.

These ultra-compact modems have the XBee form factor and are interchangeable with other Wi-Fi, ZigBee or 802.15.4 products.

The sometimes crippling defect of Wi-Fi (consumption) is erased here thanks to the introduction of a sleep mode that can lower consumption to less than 6 A under the typical 3.3 VDC of power supply.

This module opens up new opportunities, particularly in the field of energy management, robotics and sensor radio networking. The XBee Wi-Fi 6B series is an evolution of the 6 series. The main improvements are the maximum transmission speed from about 3Mbps for series 6 to almost 6.5Mbps in SPI for the 6B series. The 6B series also includes Digi Remote Manager support, which allows it to integrate into cloud configurations.



Series interface UART up to 1 Mbps, SPI up to 6 Mbps
Methods setting up AT or API commands
Frequency band ISM 2.4 GHz
Analog entries 4 (12-bit)
Digital E/S 10
Shape factor XBee crossing or CMS (SMT)
Antenna options

Crossing version

XB2B-WFPT-001 : ON-board PCB antenna
XB2B-WFST-001 : RPSMA connector
XB2B-WFUT-001 In: UFL connector
XB2B-WFWT-001 : whip antenna

Versions CMS

XB2B-WFPS-001 : ON-board PCB antenna
XB2B-WFRS-001 : RF Pad connection area
XB2B-WFUS-001 In: UFL connector

Temp. Operation -30C to 85oC
Size Crossing 2.438 cm x 3.294 cm
Cms: 2.20 cm x 3.40 cm x 0.30 cm


Security WPA-PSK, WPA2-PSK and WEM
Number of channels 13


Standard 802.11b/g/n
Transfer rate 1 Mbps up to 72 Mbps
Modulation 802.11b: CCK, DSSS
802.11g/n: OFDM with BPSK, QPSK, 16-QAM, 64-QAM
Transmission power Up to 16 dBm
Receiver sensitivity -93 to -71 dBm


Power tension 3.14 to 3.46 V
Current transmission mode Up to 309 mA
Current reception mode 100 mA
Current sleep mode < 6 uA - 25 degrees Fahrenheit




See summary table here

IC (Canada)
CE/ETSI (Europe)
C-TICK (Australia)
Telec (Japan)
Anatel (Brazil)


The XBee Wi-Fi S6B (XK2B-WFT-O) Includes:

- 1 XBee Wi-Fi S6B Crossing module with PCB antenna
- 1 XBee Wi-Fi S6B SMT module with a UFL connector
- 1 antenna with UFL connector
- 2 USB interface development cards ( 1 crossover model, 1 SMT model)

Contact us for more information

Vous pourriez également être intéressé par...